Supertwisted Chiral Gyroid Mesophase in Chiral Rod-like Compounds.

Among the intriguing bicontinuous self-assembled structures, the gyroid cubic is the most ubiquitous. It is found in block and star polymers, surfactants with or without solvent, in thermotropic liquid crystals with end- or side-chains, and in biosystems providing structural color and modelling cell mitosis. It contains two interpenetrating networks of opposite chirality and is thus achiral if, as usual, the content of the two nets is the same. But we now find that this is not the case for strongly chiral compounds. While achiral molecules follow the opposite twists of nets 1 and 2, molecules with a chiral center in their rod-like core fail to follow the 70° twist between junctions in net 2 and instead wind against it by -110° to still match the junction orientation. The metastable chiral gyroid is a high-entropy high-heat-capacity mesophase. The homochirality of its nets makes the CD signal of the thienofluorenone compounds close to that in the stable I23 phase with 3 isochiral nets.

Repetitive transcranial magnetic stimulation for Alzheimer's disease: an overview of systematic reviews and meta-analysis.

Objective: Alzheimer's disease (AD) is a prevalent neurodegenerative condition that significantly impacts both individuals and society. This study aims to evaluate the effectiveness of repetitive transcranial magnetic stimulation (rTMS) as a treatment for AD by summarizing the evidence from systematic reviews (SRs) and meta-analyses (MAs). Methods: SRs/MAs of rTMS for AD were collected by searching Embase, Web of Science, Cochrane Library, PubMed, CNKI, VIP, Sino-Med, and Wanfang databases. The search was conducted from database creation to January 23, 2024. Methodological quality, reporting quality and risk of bias were assessed using the Assessing Methodological Quality of Systematic Reviews 2 (AMSTAR-2), Risk of Bias in Systematic Reviews (ROBIS) tool and the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA). In addition, the quality of evidence for outcome measures was assessed using the Grading of Recommendations, Assessment, Development and Evaluation (GRADE). Results: Eight SRs/MAs included in this study met the inclusion criteria. Based on the AMSTAR-2, 4 of the SRs/MA were classified as low quality, while the remaining 4 were deemed to be of very low quality. The PRISMA analysis revealed that out of the 27 items reporting, 16 achieved full reporting (100%). However, there were still some deficiencies in reporting, particularly related to protocol and registration, search strategy, risk of bias, and additional analysis. The ROBIS tool indicated that only 3 SRs/MAs had a low risk of bias. The GRADE assessment indicated that 6 outcomes were of moderate quality (18.75%), 16 were of low quality (50%), and 10 were classified as very low quality (31.25%). Conclusion: Based on the evidence collected, rTMS appears to be effective in improving cognitive function in AD patients, although the methodological quality of the SRs/MAs reduces the reliability of the conclusions and the overall quality is low. However, based on the available results, we still support the value of rTMS as an intervention to improve cognitive function in AD. In future studies, it is necessary to confirm the efficacy of rTMS in AD patients and provide more reliable and scientific data to contribute to evidence-based medicine.

Isolation, identification, and optimization of conditions for the degradation of four sulfonamide antibiotics and their metabolic pathways in Pseudomonas stutzeri strain DLY-21.

Overuse of sulfonamides in aquaculture and agriculture leads to residual drugs that cause serious pollution of the environment. However, the residues of sulfonamides in the environment are not unique, and the existing microbial degradation technology has a relatively low degradation rate of sulfonamides. Therefore, in this study, a Pseudomonas stutzeri strain (DLY-21) with the ability to degrade four common SAs was screened and isolated from aerobic compost. Under optimal conditions, the DLY-21 strain degraded four sulfonamides simultaneously within 48 h, and the degradation rates were all over 90%, with the average degradation rates of SAs being sulfoxide (SDM) ≈ sulfachloropyridazine (SCP) > sulfa quinoxaline (SQ) > sulfadiazine (SQ). In addition, the main compounds of the strain DLY-21-degrading SAs were identified by LC-MS analysis. On this basis, four detailed reaction pathways for SA degradation were deduced. This is the first report of the use of a P. stutzeri strain to degrade four sulfonamide antibiotics (SQ, SDM, SCP, and SM1), which can improve the removal efficiency of sulfonamide antibiotic pollutants and thus ameliorate environmental pollution. The results showed that DLY-21 had a good degradation effect on four SAs (SQ, SDM, SCP, and SM1).

Effect of oesophagectomy on lipid profiles in patients with oesophageal cancer combined with hyperlipidaemia: a retrospective study.

BACKGROUND: Surgery is widely regarded as a pivotal therapeutic approach for treating oesophageal cancer, and clinical observations have revealed that many oesophageal cancer patients also present with concomitant hyperlipidaemia. It is surprising that few studies have been performed to determine how blood lipid levels are affected by oesophageal cancer resection. This research was designed to assess the influence of oesophageal cancer resection on lipid profiles among individuals diagnosed with both oesophageal cancer and hyperlipidaemia. METHODS: A retrospective analysis was carried out on 110 patients with hyperlipidaemia and oesophageal cancer who had undergone oesophagectomy at the 900th Hospital of the Joint Logistics Support Force of the Chinese People's Liberation Army. Preoperative and postoperative serological data were collected at seven-, thirty-, sixty-day-, and one-year-long intervals. Changes in lipid levels were compared, the remission of various types of hyperlipidaemia was statistically assessed, and Pearson correlation was used to analyse the association between lipid changes and preoperative body weight. The research sought to assess the reduction in body weight and the proportion of body weight lost one year following surgery. RESULTS: Noteworthy decreases were observed in total cholesterol (TC), triglyceride (TG), and low-density lipoprotein (LDL) levels, with TC decreasing from 6.20 mmol/L to 5.20 mmol/L, TG decreasing from 1.40 mmol/L to 1.20 mmol/L, and LDL decreasing from 4.50 mmol/L to 3.30 mmol/L. Conversely, there was a notable increase in high-density lipoprotein (HDL) levels, which increased from 1.20 mmol/L to 1.40 mmol/L (P < 0.05) compared to the preoperative levels. Notably, the remission rates for mixed hyperlipidaemia (60.9%) and high cholesterol (60.0%) were considerably greater than those for high triglycerides (16.2%). Alterations in TC at one year postoperatively correlated with preoperative weight and weight loss (r = 0.315, -0.216); changes in TG correlated with preoperative weight, percentage of total weight loss (TWL%), and weight reduction (r = -0.295, -0.246, 0.320); and changes in LDL correlated with preoperative weight, TWL%, and weight loss (r = 0.251, 0.186, and -0.207). Changes in non-high-density lipoprotein(non-HDL) were linked to preoperative weight (r = 0.300), and changes in TG/HDL were correlated with preoperative weight and TWL% (r = -0.424, -0.251). CONCLUSIONS: Oesophagectomy significantly improved lipid profiles in oesophageal cancer patients, potentially leading to a reduction in overall cardiovascular risk.

A coupling model based on spatial characteristics and evolution of terrestrial ecosystem carbon storage: a case study of Hanzhong.

Ecosystem carbon storage (ECS) is a critical consideration in reducing the impact of global warming and tackling environmental challenges, positioning it at the forefront of contemporary research. Due to the significant differences in the influence of land usage patterns on ECS in various policy contexts and China's commitment to attaining a carbon-neutral status, a model simulating different scenarios is needed to analyze the spatiotemporal characteristics and evolutionary process of carbon storage in terrestrial ecosystems accurately. To address this challenge, this study established a coupling model of "Geographical analysis -Evolution analysis -Predicting (GEP)" for assessing ecosystem ECS and analyzing its spatial characteristics and evolutionary patterns and projecting the spatial distribution of ECS under various developmental scenarios, which analyzed variations in ECS across different levels of magnitude and delineated the changing areas across a range of varying scenarios in the future additionally. The outcomes suggested that the ECS decreased by 1.17 × 106 t from 1990 to 2020, which pertaining to the utilization transfer of land in the area, whose change in ECS levels with a positive trend. It is predicted that the ECS will grow by 1.15 × 106 t and 1.44 × 106 t, in 2030 and 2060 compared with 2020 within the framework of natural development scenario (NDS), while within the framework of ecological protection scene (EPS), ECS will increase significantly, increasing by 3.06 × 106 t and 4.44 × 106 t. There will be more areas where ECS increases within the framework of EPS, by comparing with the NDS. This study offers a comprehensive analysis of Hanzhong City's carbon storage trends, demonstrating its significant impact on climate change mitigation and serving as a predictive model for similar regions, which underscores the importance of localized carbon management strategies, offering valuable insights for local governments in formulating effective climate adaptation and mitigation policies.

Discrimination of untreated and sodium sulphite treated bean sprouts by Fourier transform infrared spectroscopy and chemometrics.

Sprouts of black beans (Phaseolus vulgaris L.), soybeans (Glycine max L.) and mung beans (Vigna radiata L.) are widely consumed foods containing abundant nutrients with biological activities. They are commonly treated with sulphites for the preservation and extension of shelf-life. However, our previous investigation found that immersing the bean sprouts in sulphite might convert the active components into sulphur-containing derivatives, which can affect both the quality and safety of the sprouts. This study explores the use of FTIR in conjunction with chemometric techniques to differentiate between non-immersed (NI) and sodium sulphite immersed (SI) black bean, soybean and mung bean sprouts. A total of 168 batches of raw spectra were obtained from NI and SI-bean sprouts using FTIR spectroscopy. Four pre-processing techniques, three modelling assessment techniques and four model evaluation indices were examined for differences in performance. The results show that the multiplicative scatter correction is the most effective pre-processing method. Among the models, the accuracy rate of the three models was as follows: radial basis function neural network (95%) > convolutional neural network (91%) > random forest (82%). The overall findings indicate that FTIR spectroscopy, in conjunction with appropriate chemometric approaches, has a high potential for rapidly determining the difference between NI and SI-bean sprouts.

Highly Ordered Gyroid Nanostructured Polymers: Facile Fabrication by Polymerizable Pluronic Surfactants.

Highly ordered, network-nanostructured polymers offer compelling geometric features and application potential. However, their practical utilization is hampered by the restricted accessibility. Here, we address this challenge using commercial Pluronic surfactants with a straightforward modification of tethering polymerizable groups. By leveraging lyotropic self-assembly, we achieve facile production of double-gyroid mesophases, which are subsequently solidified via photoinduced cross-linking. The exceptionally ordered periodicities of Ia3d symmetry in the photocured polymers are unambiguously confirmed by synchrotron small-angle X-ray scattering (SAXS), which can capture single-crystal-like diffraction patterns. Electron density maps reconstructed from SAXS data complemented by transmission electron microscopy analysis further elucidate the real-space gyroid assemblies. Intriguingly, by tuning the cross-linking through thiol-acrylate chemistry, the mechanical properties of the polymer are modulated without compromising the integrity of Ia3d assemblies. The 3-D percolating gyroid nanochannels demonstrate an ionic conductivity that surpasses that of disordered structures, offering promising prospects for scalable fabrication.

GEN1 as a risk factor for human congenital anomalies of the kidney and urinary tract.

BACKGROUND: Congenital anomalies of the kidney and urinary tract (CAKUT) are prevalent birth defects. Although pathogenic CAKUT genes are known, they are insufficient to reveal the causes for all patients. Our previous studies indicated GEN1 as a pathogenic gene of CAKUT in mice, and this study further investigated the correlation between GEN1 and human CAKUT. METHODS: In this study, DNA from 910 individuals with CAKUT was collected; 26 GEN1 rare variants were identified, and two GEN1 (missense) variants in a non-CAKUT group were found. Mainly due to the stability results of the predicted mutant on the website, in vitro, 10 variants (eight CAKUT, two non-CAKUT) were selected to verify mutant protein stability. In addition, mainly based on the division of the mutation site located in the functional region of the GEN1 protein, 8 variants (six CAKUT, two non-CAKUT) were selected to verify enzymatic hydrolysis, and the splice variant GEN1 (c.1071 + 3(IVS10) A > G) was selected to verify shear ability. Based on the results of in vitro experiments and higher frequency, three sites with the most significant functional change were selected to build mouse models. RESULTS: Protein stability changed in six variants in the CAKUT group. Based on electrophoretic mobility shift assay of eight variants (six CAKUT, two non-CAKUT), the enzymatic hydrolysis and DNA-binding abilities of mutant proteins were impaired in the CAKUT group. The most serious functional damage was observed in the Gen1 variant that produced a truncated protein. A mini-gene splicing assay showed that the variant GEN1 (c.1071 + 3(IVS10) A > G) in the CAKUT group significantly affected splicing function. An abnormal exon10 was detected in the mini-gene splicing assay. Point-mutant mouse strains were constructed (Gen1: c.1068 + 3 A > G, p.R400X, and p.T105R) based on the variant frequency in the CAKUT group and functional impairment in vitro study and CAKUT phenotypes were replicated in each. CONCLUSION: Overall, our findings indicated GEN1 as a risk factor for human CAKUT.

High-throughput mutagenesis and screening approach for the identification of drug-resistant mutations in the rifampicin resistance-determining region of mycobacteria.

Rifampicin is the most powerful first-line antibiotic for tuberculosis, which is caused by Mycobacterium tuberculosis. Although accumulating evidence from sequencing data of clinical M. tuberculosis isolates suggested that mutations in the rifampicin-resistance-determining region (RRDR) are strongly associated with rifampicin resistance, the comprehensive characterization of RRDR polymorphisms that confer this resistance remains challenging. By incorporating I-SceI sites for I-SceI-based integrant removal and utilizing an L5 swap strategy, we efficiently replaced the integrated plasmid with alternative alleles, making mass allelic exchange feasible in mycobacteria. Using this method to establish a fitness-related gain-of function screen, we generated a mutant library that included all single-amino-acid mutations in the RRDR, and identified the important positions corresponding to some well-known rifampicin-resistance mutations (Q513, D516, S522, H525, R529, S531). We also detected a novel two-point mutation located in the RRDR confers a fitness advantage to M. smegmatis in the presence or absence of rifampicin. Our method provides comprehensive insight into the growth phenotypes of RRDR mutants and should facilitate the development of anti-tuberculosis drugs.

Sleep factors were associated with a higher risk of MAFLD and significant fibrosis.

PURPOSE: The relationships of sleep factors separately and jointly with metabolic associated fatty liver disease (MAFLD) and significant fibrosis remain unclear. We intended to explore the relationships in the United States. METHODS: This cross-sectional study included 4477 individuals from the National Health and Nutrition Examination Survey from 2017 to 2018. Information regarding each sleep factor (sleep duration, trouble sleeping, snoring, excessive daytime sleep, and sleep apnea symptoms) was obtained through questionnaires. MAFLD was diagnosed by transient elastography according to the consensus definitions. Multivariable logistic regression models were employed to explore relationships of sleep factors separately and jointly with MAFLD and significant fibrosis. RESULTS: Participants having a poor sleep pattern was associated with higher MAFLD and significant fibrosis risk, and poor sleep pattern was related to about threefold (OR, 3.67; 95% CI, 1.82-7.37) increased risk of MAFLD remarkably. When examining specific factors of sleep patterns individually, trouble sleeping (OR, 1.53; 95% CI, 1.10-2.12), snoring (OR, 2.11; 95% CI, 1.40-3.19), excessive daytime sleep (OR, 1.57; 95% CI, 0.93-2.62), and sleep apnea symptoms (OR, 1.87; 95% CI, 1.13-3.10) were positively associated with the odds of MAFLD (all P < 0.05). However, sleep duration was not independently correlated with MAFLD or significant fibrosis. Sleep patterns showed similar relationships with MAFLD, regardless of all age, sex, physical activity, and shift work groups. CONCLUSIONS: Poor sleep pattern was linked with a considerably higher risk of MAFLD and significant fibrosis.

Discovery of Novel 5,6-Dihydro-4H-pyrido[2,3,4-de]quinazoline Irreversible Inhibitors Targeting Both Wild-Type and A775_G776insYVMA Mutated HER2 Kinases.

HER2 mutations were seen in 4% of non-small-cell lung cancer (NSCLC) patients. Most of these mutations (90%) occur as an insertion mutation within the exon 20 frame, leading to the downstream activation of the PI3K-AKT and RAS/MAPK pathways. However, no targeted therapies have yet been approved worldwide. Here a novel series of highly potent HER2 inhibitors with a pyrido[2,3,4-de]quinazoline core were designed and developed. The derivatives with the pyrido[2,3,4-de]quinazoline core displayed superior efficacy of antiproliferation in BaF3 cells harboring HER2insYVMA mutation compared with afatinib and neratinib. Rat studies showed that 8a and 9a with the newly developed core have good pharmacokinetic properties with an oral bioavailability of 41.7 and 42.0%, respectively. Oral administration of 4a and 10e (30 mg/kg, QD) displayed significant antitumor efficacy in an in vivo xenograft model. We proposed promising strategies for the development of HER2insYVMA mutant inhibitors in this study.

Independent and joint association of physical activity and adequate weekday sleep duration with metabolic dysfunction-associated steatotic liver disease.

BACKGROUND: The independent and joint association of physical activity (PA) and weekday sleep duration with metabolic dysfunction-associated steatotic liver disease (MASLD) remain unclear. AIMS: We intended to explore this association in the United States. METHODS: This cross-sectional study recruited 4974 individuals from the National Health and Nutrition Examination Survey between 2017 and 2018. Information regarding PA and weekday sleep duration was obtained through questionnaires. Metabolic associated fatty liver disease (MAFLD) was diagnosed by transient elastography based on the consensus definitions. Multivariable logistic regression models were employed to investigate the independent and joint association of PA and weekday sleep duration with MAFLD. RESULTS: Of the 4974 subjects, engaging in active PA or sustaining adequate sleep duration was associated with decreased the odds of MAFLD (p < 0.05). Specifically, active leisure-time PA was linked to lower 37 % odds of MAFLD (OR, 0.63; 95 % CI, 0.55-0.73). Individuals who had one to twice times (150-299 min/week) or more than twice (≥300 min/week) the recommended amount of leisure-time PA by PA Guidelines had 19 % (OR, 0.81; 95 % CI, 0.67-0.99) and 45 % (OR, 0.55; 95 % CI, 0.47-0.65) lower odds of MAFLD, respectively (P for trend <0.001). Individuals with adequate weekday sleep duration was associated with 24 % lower odds of MAFLD (OR, 0.76;95 % CI,0.67-0.88). Notably, active PA combined with adequate weekday sleep duration significantly decreased the odds ratios for MAFLD by 35 % (OR: 0.65, 95 % CI, 0.52-0.80). However, in individuals with significant alcohol use, the joint effect of total PA and weekday sleep duration on MAFLD was not statistically significant. CONCLUSIONS: Both active PA and adequate weekday sleep duration were inversely associated with the risk of MASLD independently, while combining them could further lower the risk of MASLD.

Pure optical twist with zero net torque.

In photonic systems, bilayer or multilayer systems exhibit numerous exciting phenomena induced by twisting. Thus, it is highly desired to explore the twisting effect by engineering the light-matter interactions. Optical torque, an important means in optical micromanipulation, can rotate micro-objects in various ways, enabling a wide range of promising applications. In this study, we present an interesting phenomenon called "pure optical twist" (POT), which emerges when a bilayer structure with specific symmetry is illuminated by counter-propagating lights with opposite spin and/or orbital angular momentum. Remarkably, this leads to zero net optical torque but yet possesses an interesting mechanical effect of bilayer system twisting. The crucial determinant of this phenomenon is the rotational symmetries of each layer, which govern the allowed azimuthal channels of the scattered wave. When the rotational symmetries do not allow these channels to overlap, no resultant torque is observed. Our work will encourage further exploration of the twisting effect through engineered light-matter interactions. This opens up the possibility of creating twisted bilayer systems using optical means, and constructing a stable bilayer optical motor that maintains identical rotation frequencies for both layers.

Injectable and Thermosensitive Hydrogel with Platelet-Rich Plasma for Enhanced Biotherapy of Skin Wound Healing.

The rapid and effective healing of skin wounds resulted from severe injuries and full-layer skin defects remains a pressing clinical challenge in contemporary medical practice. The reduction of wound infection and rapid healing is helpful to rebuild and repair skin tissue. Here, a thermosensitive chitosan-based wound dressing hydrogel incorporating ß-glycerophosphate (GP), hydroxy propyl cellulose (HPC), graphene oxide (GO), and platelet-rich plasma (PRP) is developed, which exhibits the dual functions of antibacterial properties and repair promotion. GP and HPC enhance the mechanical properties through forming hydrogen bonding connection, while GO produces local heat under near-infrared light, leading to improved blood circulation and skin recovery. Notably, antibacterial properties against Pseudomonas aeruginosa, and control-release of growth factors from PRP are also achieved based on the system. In vitro experiments reveal its biocompatibility, and ability to promote cell proliferation and migration. Animal experiments demonstrate that the epithelial repair and collagen deposition can be promoted during skin wound healing in Sprague Dawley rats. Moreover, a reduction in wound inflammation levels and the improvement of wound microenvironment are observed, collectively fostering effective wound healing. Therefore, the composite hydrogel system incorporated with GO and PRP can be a promising dressing for the treatment of skin wounds.

Efficacy of H2O2 inactivated bovine virus diarrhoea virus (BVDV) type 1 vaccine in mice.

BACKGROUND: Bovine viral diarrhea (BVD) is an acute febrile infectious disease caused by the bovine viral diarrhea virus (BVDV), which has brought huge economic losses to the world's cattle industry. At present, commercial inactivated BVDV vaccines may cause some adverse reactions during use. This study aims to develop a safer and more efficient inactivated BVDV vaccine. METHODS: Here, we described the generation and preclinical efficacy of a hydrogen peroxide (H2O2) inactivated BVDV type 1 vaccine in mice, and administered it separately with commercial vaccine (formaldehyde inactivated) in mice to study its efficacy. RESULTS: The BVDV type 1 IgG, IFN- γ, IL-4 and neutralizing antibody in the serum of the H2O2 inactivated vaccine group can be maintained in mice for 70 days. The IgG level reached its maximum value of 0.67 on the 42nd day, significantly higher than the commercial formaldehyde inactivated BVDV type 1 vaccine. IFN- γ and IL-4 reached their maximum values on the 28th day after immunization, at 123.16 pg/ml and 143.80 pg/ml, respectively, slightly higher than commercial vaccines, but the effect was not significant. At the same time the BVDV-1 neutralizing antibody titer reached a maximum of 12 Nu on the 42nd day post vaccination. CONCLUSIONS: The H2O2 inactivated BVDV vaccine has good safety and immunogenicity, which provides a potential solution for the further development of an efficient and safe BVDV vaccine.

Three-Dimensional Polyoxometalate Organic Frameworks with One-Dimensional Channels Constructed by Multiple Helical Chains Based on 22-Core Ln/Mn/Mo Clusters for Proton Conduction.

Two unique 22-core sandwich {[Mn6Mo6O37]Ln3[MnMo6O24]} (Ln = La or Pr) units have been assembled, featuring an undisclosed {Mn6Mo6} cluster. This assembly is subsequently integrated into two three-dimensional polyoxometalate organic frameworks, which exhibit one-dimensional hydrophilic hexagonal channels formed by six intertwined 63 helical chains, leading to effective proton conduction primarily facilitated by an abundance of water molecules within the channels.

Self-efficacy and cheating among young children.

This research, comprising three preregistered studies, investigated the link between self-efficacy and cheating on an academic test in 5- and 6-year-old children. Study 1 assessed children's general self-efficacy and found it to be unrelated to their cheating behavior. Study 2 assessed task-specific self-efficacy, which was not found to be associated with cheating. In Study 3, children were randomly assigned to either an experimental group, which received brief positive feedback on task-specific self-efficacy, or a control group, which received no feedback. The experimental group demonstrated significantly less cheating. These findings, for the first time, identify a specific connection between young children's self-efficacy and academic dishonesty and suggest that positive feedback on task-specific efficacy could be a simple effective strategy for fostering academic integrity early on.

Studying the influence of surface roughness with different shapes and quantities on convective heat transfer of fluid within nanochannels using molecular dynamics simulations.

CONTEXT: In the past decade, rapid advancements in microtechnology and nanotechnology have propelled modern science and technology into the nanoscale domain, where miniaturization and high integration have found extensive applications across various fields, including industry, biotechnology, and information technology. Mechanisms of nanofluid flow and heat transfer properties have received increasing attention. In the flow and convective heat transfer of fluids at the nanoscale, the shape and dimensions of the surfaces play a crucial role. So, the main purpose of our paper is to investigate the influence of surface roughness with different shapes and quantities on fluid flow and convective heat transfer. In this study, we have chosen argon atoms as the fluid and used copper atoms to simulate the nanochannel walls. In order to investigate the influence of the shape and quantity of roughness on the convective heat transfer of fluids within nanochannels, we computed and analyzed the velocity, temperature, and density distributions of fluids inside channels with triangular, hemispherical, and rectangular roughness. Through simulation results, we found that triangular, hemispherical, and rectangular surface roughness at the same height can result in differences in temperature and velocity of the fluid within nanochannels. With a nanochannel roughness number of 5, the temperature and velocity of the fluid at the middle position of the nano-channel for the triangular roughness increased by 6% and 25% compared to the rectangular roughness, and by 4% and 10% compared to the hemispherical roughness. The fluid temperature and velocity are highest in channels with triangular surface roughness and lowest in those with rectangular roughness. Furthermore, increasing the quantity of surface roughness decreases the temperature and velocity of the fluid within nanochannels. When the quantity of rectangular surface roughness is 5, the fluid temperature within the nanochannel decreases by 12%, and the velocity decreases by 38% compared to a roughness quantity of 1. We also found, through velocity contours, that the presence of roughness increases the local fluid velocity in the rough regions of nanochannels. Roughness also reduces the density fluctuations of the fluid near the walls within the nanochannel. Roughness significantly affects the heat transfer performance of the fluid during its flow, and this influence should not be overlooked. METHODS: In this study, molecular dynamics theory was employed, and simulations were conducted using the open-source software LAMMPS to investigate the influence of different shapes and quantities of surface roughness on fluid flow within nanochannels. The model in this paper was constructed using the LAMMPS software, and the surface roughness shapes on the walls were implemented as rectangular, hemispherical, and triangular. The wall surfaces were composed of copper atoms, while the fluid consisted of argon atoms. The copper atoms were arranged in a face-centered cubic (FCC) lattice with a lattice constant of 3.615 Å. Similarly, the argon atoms were arranged in a face-centered cubic (FCC) lattice with a lattice constant of 5.62 Å. The interactions between copper atoms were modeled using the EAM (Embedded Atom Method) potential, while the interactions between argon atoms were described using the LJ (Lennard-Jones) potential. The LJ potential was also employed to represent interactions between argon and copper atoms.

The construction of dual-emissive ratiometric fluorescent probes based on fluorescent nanoparticles for the detection of metal ions and small molecules.

With the rapid development of fluorescent nanoparticles (FNPs), such as CDs, QDs, and MOFs, the construction of FNP-based probes has played a key role in improving chemical sensors. Ratiometric fluorescent probes exhibit distinct advantages, such as resistance to environmental interference and achieving visualization. Thus, FNP-based dual-emission ratiometric fluorescent probes (DRFPs) have rapidly developed in the field of metal ion and small molecule detection in the past few years. In this review, firstly we introduce the fluorescence sensing mechanisms; then, we focus on the strategies for the fabrication of DRFPs, including hybrid FNPs, single FNPs with intrinsic dual emission and target-induced new emission, and DRFPs based on auxiliary nanoparticles. In the section on hybrid FNPs, methods to assemble two types of FNPs, such as chemical bonding, electrostatic interaction, core satellite or core-shell structures, coordination, and encapsulation, are introduced. In the section on single FNPs with intrinsic dual emission, methods for the design of dual-emission CDs, QDs, and MOFs are discussed. Regarding target-induced new emission, sensitization, coordination, hydrogen bonding, and chemical reaction induced new emissions are discussed. Furthermore, in the section on DRFPs based on auxiliary nanoparticles, auxiliary nanomaterials with the inner filter effect and enzyme mimicking activity are discussed. Finally, the existing challenges and an outlook on the future of DRFP are presented. We sincerely hope that this review will contribute to the quick understanding and exploration of DRFPs by researchers.

Interfacial and Electronic Modulation of W Bridging Heterostructure Between WS2 and Cobalt-Based Compounds for Efficient Overall Water Splitting.

The development of high performance electrocatalysts for effective hydrogen production is urgently needed. Herein, three hybrid catalysts formed by WS2 and Co-based metal-organic frameworks (MOFs) derivatives are constructed, in which the small amount of W in the MOFs derivatives acts as a bridge to provide the charge transfer channel and enhance the stability. In addition, the effects of the surface charge distribution on the catalytic performance are fully investigated. Due to the optimal interfacial electron coupling and rearrangement as well as its unique porous morphology, WS2 @W-CoPx exhibits superior bifunctional performance in alkaline media with low overpotentials in hydrogen evolution reaction (HER) (62 mV at 10 mA cm-2 ) and oxygen evolution reaction (OER) (278 mV at 100 mA cm-2 ). For overall water splitting (OWS), WS2 @W-CoPx only requires a cell voltage of 1.78 V at 50 mA cm-2 and maintains good stability within 72 h. Density functional theory calculations verify that the combination of W-CoPx with WS2 can effectively enhance the activity of OER and HER with weakened OH (or O) adsorption and enhanced H atom adsorption. This work provides a feasible idea for the design and practical application of WS2 or phosphide-based catalysts in OWS.